CAL 882

1 Bed | 1 Bath | 882 sq ft

CAL 888

1 Bed | 1 Bath | 888 sq.ft

1 Bedroom
1 Bath

Starting at $360K*

* Pricing for module only. Does not include shipping, site work and installation.

____

CAL 888 is another elongated designed ADU with one bedroom, one bath, and an indoor garage/multi-purpose space. It has a 44’ x 13’ living area and a 24’ x 13’ garage/multi-purpose space attached on the side. The floor plan essentially allows for a linear access from the main entrance on one side through the sliding doors and to the sleeping area on the other end. An open space that caters to the living room, dining area and kitchen welcomes the users upon entry. The kitchen is L-shaped with overhead cabinets and a dedicated space for a full-sized refrigerator. An adjacent door leads to the garage/multi-purpose space. The hallway directs its users to the toilet with shower and the bedroom. The bedroom fits a California King sized (72” x 84”) bed. Compared to other California Modular ADUs, this design has a walk-in closet providing a lot of storage space for clothes and vanity items. The washer/dryer is also fitted in the corner of this area instead of a utility closet in the kitchen space. The bedroom has its own patio, situated at the back of the garage/multi-purpose space making it semi-private. The roof is shed type angled along the longer dimension of the plan.  There is also a variation in ceiling height where it is noticeably higher in the living area than in the garage/multi-purpose space. There is a deck on the outside that serves as an extended living space when the sliding doors are opened.

Standard package features and finishes for CAL 888 are shown in the table below. Upgrade options are available depending on client preference.

STRUCTURE

Framing

Walls: 2” x 6” wood frame, standard 16” OC with fiberglass insulation (R19 exterior) (R11 interior)

Floor: 2” x 8” wood frame, standard 16” OC with ¾” OSB/plywood sub-floor sheathing with fiberglass insulation (R19)

Ceiling: 2” x 8” wood frame, standard 16” OC with fiberglass insulation (R30)

Roof: 2” x 6” wood frame truss with ½” OSB/plywood sheathing

Walls: 2” x 6” light guage steel (LGS) frame, standard 16” OC with choice of mineral wool or spray foam insulation (R19 exterior) (R11 interior)

Floor: 2” x 8” light gauge steel (LGS) frame, standard 16” OC, 3/4" OSB/plywood sub-floor sheathing with choice of mineral wool or spray foam insulation (R19)

Ceiling: 2” x 8” light gauge steel (LGS) frame, standard 16” OC, with choice of mineral wool or spray foam insulation (R19)

Roof: 2" x 6" light gauge steel (LGS) truss with 1/2" OSB/plywood sheathing

Mechanical

  • Split system HVAC
  • Split or central dual ducted HVAC system

Electrical

  • LED lighting where indicated
  • Standard receptacles and switches
  • 120VAC throughout
  • LED lighting where indicated
  • Upgraded receptacles and switches as per client’s choice
  • 120VAC throughout

Plumbing

  • PEX throughout
  • Copper throughout

EXTERIOR

FINISHES

Wall / Ceiling

Interior: ½” gypsum drywall with rough coat plaster finish, painted with choice of color

Exterior: ½” OSB/plywood backing with fiber cement board, painted with choice of color or style

Interior: ¾” gypsum drywall or MgO board with choice of smooth plaster finish or other wall covering

Exterior: ¾” plywood sheathing with smooth plaster finish or upgraded choice of siding

Floor

  • Vinyl / Laminate Plank, choice of color/style
  • Hardwood, tile, or carpet with choice of colors and style

Roof

  • 30 Year Asphalt Shingle, choice of standard color
  • Choice of standing seam or tile with color option

Windows / Sliders

  • Dual-pane, white vinyl / fiber glass frame
  • Dual-pane aluminum frame with choice of color

Doors

Interior: Hollow-core wood, painted to match walls

Exterior: Solid-core, painted to match exterior/interior (if plans specify exterior door)

Interior: Solid-core wood, painted with choice of color

Exterior: Solid-core wood/steel, optional over-sized and choice of color

Cabinets

  • Factory-direct, color to match walls
  • Custom-designed to client specifications

Fixtures

  • “American Standard” or equivalent (subject to availability)
  • “Kohler” or other choice of upgraded fixtures per client’s choice

Appliances

Not included in Standard Package

Client’s choice of appliance packages

INTERIOR

Doll House Floor Plan

Printable Floor Plan

1 Bed | 1 Bath | 888 sq.ft

3 Bedroom, 2 Bath

Starting at $360K*

3 Bed | 2 Bath | 1,200 sq ft

* Pricing for module only. Does not include shipping, site work and installation.

A Sustainable,
Eco-Friendly Home

During the construction process, our prefab homes generate about 80% less waste then standard site built homes.  A controlled factory setting allows us to use construction materials in a more efficient manner.  In addition, waste and poor workmanship caused by weather is eliminated.  The National Association of Homebuilders (NAHB) states,  “There are tremendous benefits to building parts of the home in a controlled facility, materials are protected from the weather and used in a more efficient manner.”

Scroll to Top